Rigging Solutions by Allen Performance
 Rigging Solutions
 Team Allen
 Allen Academy
 Technical Instructions
 Spinnaker Pole Systems
 A4555 Delta self bailer - template
 Allen Dry Lubricant
 Fast Pins Technical Info

 

Made in the UK by Allenbros


Rigging Solutions   



Mainsheet system

Mainsheet system
Three A2040 dynamic blocks are used on the lark mainsheet system.  the large central whole in the block is perfect for tie-ing rope through, and the cold forged radiused head is kind on the fixings line. The stainless steel inner dynamic bearing technology means the blocks run freely, perfect for mainsheet, jib, spinnaker and vang systems.


Cleating Control

Cleating Control
A 30mm dynamic bearing block A2030 attached with a stainless steel forged eye strap A5014 leads the jib sheet into a large alloy cam cleat A..76 with mega prolead A.496.  The mega prolead enhances cleating angles for superior performance whilst the cam cleat's jaw profile is designed for smooth cleating and uncleating for ultimate jib control.


Cascade kicker system

Cascade kicker system
A 16:1 ratio cascade kicker system with a high tension stainless steel top block A4479 to take the highest load to a 20mm dynamic block A2020 and a double 20mm block A2022 for extra purchasing power.


Mast rake control

Mast rake control
Mast rake control, using a high tension block A4379 which is perfect for high static loads, bolted to the deck leading a small alloy cam cleat A..77 with mega prolead A.497 to enable trimming from any angle.


Essential hardware

Essential hardware
Essential rigging and deck hardware items include stainless steel 'u' bolts A4671, designed to withstand high loads without distortion.  Spinnaker sheet twinning lines with a stainless steel thimble A..82 laced to the end are lead through a bullseye fairlead with stainless steel liner A4452 for smooth spinnaker trimming.


Rope protectors

Rope protectors
Stainless steel rope protectors A..40 smoothly lead control lines through deck.


Mainsheet traveller

Mainsheet traveller
Mainsheet traveller on a Finn using curved track A.819 with a maxi low profile traveller car A4589TI, a 40mm tie-on dynamic block A2040TI and two 20mm tie-on dynamic blocks A2020TI.  Our traveller cars are manufactured by machining from a single solid length of high grade aluminium creating perfectly flowing ball tracks for the torlon balls to recirculate that won't explode.


Mainsheet control

Mainsheet control
The mainsheet is fed through a switchable ratchet A2160 taking the load when needed. The compact mainsheet jammer A5166COMP-ASS has an internal groove in the base of the swivel locating the bearings for smooth rotation.  The large alloy cam cleat A..76 with mega pro-lead A.496 is designed for optimal rope movement without shredding your sheets.  Raised by adding wedges to allow for the Finn's high main sheeting angle.


Line control and adjustment

Line control and adjustment
Small and large alloy cam cleats A..76 and A..676 with mega proleads for enhanced cleating angles and overfairleads A.488 for line leads, control and adjustment.


Jib track slider

Jib track slider
Adjustable jib track slider A4590 is used on the Finn to adjust toe-strap position.  Can also be used for jib track positioning

 

 

 

Return to previous page      Site Map

  Allen Brothers
Hallmark Industrial Estate
Southminster
Essex
CM0 7EH
Phone      +44 (0)1621 774689
Fax      +44 (0)1621 773872
Map      Show map
Google+
Facebook: https://www.facebook.com/allensailboathardware
“Allen products are warranted to be of merchantable quality and fit for the purpose for which they are sold. In addition, Allen products are guaranteed for life against defects in workmanship, subject to reasonable use. We will replace products which are found to have failed through manufacturing and raw material defects. The parts must have been fitted in accordance with our technical instructions, where present, and in any event following the technical guidance of our stockist or representative. No cash alternative or damages arising out of any failure will be met. While we take every reasonable effort to ensure the accuracy of published specifications, no liability will be accepted for errors or omissions. In the unlikely event of a claim arising, please return the part in question to Allen Brothers, together with a description of the circumstances. Your statutory rights are not affected.”


spacer