Tera Race Ready Packs

Tera Race Pack

Tired of scruffy looking knots and frayed rope ends? Well, we are pleased to announce our new race ready Tera packs. 

Utilising British made Marlow rope and our range of performance blocks to deliver an easy to install and use race kit. The race packs have been developed using our Team Allen sailors experience in the boat and finessed by our engineering know how. 

Vang Race Pack

Fully spliced to the perfect lengths to allow maximum travel for the blocks with a 6:1 purchase. Our race vang also includes a high load thimble set into the system to allow for a better lead for the outhaul control line. 

Pack includes

Primary Line – 3mm Marlow dyneema.

Secondary line – 4mm Marlow excel control. 

2 x A2020Ti3 – 20mm dynamic ti3-on blocks spliced into the system to allow for maximum travel. 

1 x A2044-677HK – 40mm dynamic block with becket, hook and adjustable cleat.  

1 x Soft shackle with dog bone and high load thimble. 

2 x Handles to make pulling the control line easier. 

Cunningham Race Pack

The Cunningham race pack requires two knots to complete set up, a reef knot and a bowline. Easy! The pack is a 6:1 purchase which makes the system easy to use for any sailor whilst still allowing maximum control adjustment.

Pack includes

Primary Line – 3mm Marlow dyneema.

Secondary line – 4mm Marlow excel control. 

Mast/ goosneck line – 1.5mm Marlow dyneema. 

Lower mast soft shackle – 3mm Marlow dyneema.

1 x A2030Tii – 30mm dynamic tii-on block spliced into both the primary and secondary control lines. 

2 x A2020 – 20mm dynamic blocks attached to mast via soft shackle. 

1 x Handle to make pulling the control line easier. 

1 x Dog bone spliced into mast/ goosneck line for easy connection of the primary cunningham line.

Outhaul Race Pack

The outhaul race pack has been designed to work best with our vang race pack. Leading the secondary control line through the thimble in the vang unit allows the outhaul to be pulled from either side of the boat with ease and no tangled rope.  The pack includes a super neat and easy to use clew tie as well as an elastic take up and plastic handle.

Pack includes

Primary line – 3mm Marlow dyneema.

Secondary line – 4mm Marlow excel control. 

Take up – 3mm elastic take up with snap shackle.

Clew tie – 3mm Marlow dyneema spliced in a continuous loop with 1 x A8608 dog bone.

3 x A2020Ti3 – 20mm dynamic ti3-on blocks.

1 x Handle to make pulling the control line easier. 

If you have any questions about any of the Tera race packs, please dont hesitate to get in touch – sales@allenbrothers.co.uk / +44 1621 774689

You can also find most of the rigging advice you will need in the following video.