Pad-Tii with removable Tii-Bar – This design incorporates an ingenious removable attachment pin to give a wider range of fitting options. The removable Tii-Bar range comes in 3 pieces. A male and female through deck fitting and the removable Tii-bar. To install the fitting, you simply insert the female through deck part to the underside of the mounting surface. Make a loop with your rope and insert through the male part, then slide the Tii-Bar through the loop of the rope and pull the rope tight, this will hold the Tii-Bar in place. The male part is then screwed into the female part. A set of circlip tools can be used to tighten the through deck fittings. It is also recommended a small amount of sealant is used to ensure full water tightness. It is also possible to bond the female part into the mounting surface so that the male part and Tii-bar can be removed easily without the female part falling away.